Momma Mel

The Fudge Brownie Experiment

January 22, 2013
Leave a Comment

Hey!

As many of you know, due to gallbladder issues plus pregnancy, I am on a very low fat diet. Desserts are hard to come buy that are low fat. Today, I am craving sweets- MUST HAVE SWEETS! I scrounged around the pantry looking for something, ANYTHING sweet, that wasn’t crazy high in fat and going to send me into a gallbladder attack. I found a Betty Crocker Low Fat Fudge Brownie mix and a can of pumpkin puree. So, here is my experiment to create a low fat brownie!

What you need:

Betty Crocker Low Fat Fudge Brownie Mix

1 Can of Pumpkin Puree (I used a can that was just pumpkin- no salt or anything added.)

1 Medium Banana (a mushy ripe one that no one would eat- the best kind for baking)

picture one

I stirred the baking mix and the pumpkin puree with a spoon. Then taste tested it. This concotion did NOT taste sweet. So I got out the hand mixer and mashed and blended a banana in to the mix.

picture four

Taste test? Yum!

I baked it in a 9×13 baking dish that I sprayed with Pam at 350 degrees for roughly 20 minutes, or until a knife came out clean. I let it cool, then cut it into 35 pieces- I made the pieces small since I have little people around and don’t really want them eating a big piece- the box said it made 18 squares, but these are just a perfect bite size sweet.

picture five

You ready for the best part?

Nutritional Information per Serving

(I entered the ingredients into myfitnesspal)

74 Calories

16 Carbs

1 Gram of Fat

This doesn’t even take into consideration the additional vitamins and nutrients¬†from the pumpkin and banana! One can of pumpkin has 280% of the Vitamin A you need per day! I’m not saying eat the whole baking pan, but that’s got to count for something, right?

picture six

This recipe has been kid approved – the picky eater says: I don’t like it. I LOVE it!

Advertisements

Posted in Uncategorized
Tags:

Canvas Nightlight Tutorial

January 16, 2013
1 Comment

So a while ago I pinned a picture of a craft I made on Pinterest. Apparently it was pretty cool, because within an hour it had been repinned almost 300 times. Wow! I also had people asking me for a tutorial. Not gonna lie, I almost didn’t do one, because my dad and I pulled it off using random things we had around the house, and while it looks all clean and neat from the front, the back is a hot mess of duct tape, cut up sponges, and some random sticky foam stuff, plus two screws with loops on them and some hanging wire. Not to mention the massive battery pack for the lights. But I’m going to put together a tutorial anyway, in the hopes that someone can learn from my craziness and maybe make it work in a less jumbled way.

To start with, I purchased an artist’s canvas on sale from Hobby Lobby. The size is up to you, depending on the amount of space you have and how long the quote is you want to put on it. I also purchased some dark blue acrylic paint and some of those letter stickers like you would use on posters. Since doing this project I’ve read that using spray paint instead of acrylic would make it easier to peel the stickers off later, but alas, I didn’t find out in time. That’s all I bought for this project, but I also used an exacto knife, sponge brush, unused kitchen sponge,duct tape, some sort of foam/squishy stuff with sticky adhesive on one side, one set of battery operated Christmas lights, two screws with loops on the end, and picture hanging wire.

After I gathered the initial supplies (canvas, stickers, brushes, and paint) I wrote out on a piece of paper the quote I was using to make sure that I had enough letters to complete the whole quote. I almost did- I had to make a lower case ‘L’ by slicing apart a ‘k’. Then I started sticking the stickers on. I just free handed it, but that’s because I can’t draw a straight line even with a ruler. I half heartedly used a piece of paper as a guide, but it turned out relatively straight.

After the whole quote was on the canvas, I rubbed each sticker to make sure I didn’t have any edges sticking up. I had done a clock using this method previously and had issues with paint leaking under to make some of the letters look off, so wanted to make sure I would be in the clear. Then I painted over everything. I put on two layers and left it to where it wasn’t all one solid color but kind of a wishy washy cloudy night look. Then I left it alone until the paint dried, which was a few hours.

After the paint dried, the next step was to remove the stickers. I use an exacto knife for this- very gently get under just the sticker and lift it up. This is the part I have the most trouble with because the adhesive on the stickers really likes the canvas. So I would get as much sticker and adhesive off as I could, then gently scratch away at the sticky leftovers. This takes a LONG time, and I will once again say the magic word- gently. I got a bit anxious and gouged a few tiny holes in the canvas (and myself) due to rushing it.

The next step is where the MacGyver part of the project comes in. I was staring at my canvas with my wonderful Harry Potter quote trying to decide how to get the effect I wanted. Enter my dad. I explained that I wanted the Christmas lights to poke through and not fall off, and I wasn’t sure how to make it happen. So we brainstormed, and this is what we came up with.

I would mark where I wanted each light to go with a pencil. He would poke a hole from the top side through to the back of the canvas with the exacto knife and we would then poke the lights through. We would attach the battery pack with a bit of duct tape. I would screw in two of the screws with loops (eye screws, maybe?), tie a piece wire with one end on each one, and hang it on a nail on the wall and be done.

Problem one: the lights wouldn’t stay in. Possible solutions: glue? No, because I wanted to be able to change the light strand if one went out. Duct tape? Nope, it made the lights sit crooked. Random adhesive foam/squishy stuff? That’ll do. We cut this stuff into squares and sliced a small opening in it, stuck the light bulb in and pushed it, sticky side down, onto the canvas. The lights stayed!

Problem two: the battery pack was so big, it made the bottom of the canvas stick out farther than the top, making it stick out from the wall. Solution! Super glue cut pieces of sponge around the frame to make all of it stick out enough from the wall. We did eight- two on each side, although we could have done without the two on the bottom because the battery pack stuck out. But we were thorough.

Problem three: the wires weren’t secure and were working with gravity to pull the lights away from the canvas even with the adhesive foam. Solution? Of course, duct tape. Everywhere.

Finished product?
Quote on Canvas

 

image

I’ll try and update with pics of the back side- it’s not pretty, but it works. Kind of reminds me of waterfowl- all serene and calm on the surface, but underneath paddling like crazy.


Posted in Uncategorized

I’m back… Again

January 7, 2013
Leave a Comment

So I know I’m really bad about consistency. I know it’s been over a year since I’ve posted. Maybe it’s that I was trying to be too specific. Or maybe I was just ‘too busy’. I don’t know, but whatever the reason, I am back. At least for a little bit.

I’m not going to have a theme, or a plan. I’m just going to share what is on my heart or what is going on. I’m going to try this thing called being ‘transparent’. I’ll probably share lots of kid stories, and most likely some crafts I’ve made- I did get a sewing machine for Christmas, so who knows what mischief I will get into with that. I’ve also had several requests on Pinterest for a tutorial for my quote on canvas nightlight, so I may try to wrestle up on of those.

But for today, I’m just going to share some of my life. I’m currently expecting kid number three. With a four year old and a two year old already, I’m not entirely sure how I’m going to handle it. I just had a breakdown when reading a blog post about ’10 things to do for a new mom’. Not because they were so sweet (even though they were fantastic ideas) but because it was the first time it had really REALLY hit me that I was going to go through that infant stage again. The up-all-nights, the inexplicable crying jags, the endless amount of diapers in addition to balancing time with my other two kids, getting Ri to her activities and preschool, and getting my boy potty trained and adjusted to not being the baby anymore.

Then I’m reminded of the good things. The sweet snuggles, the excitement of seeing the baby reach new milestones. I see Ri helping Micah learn how to color with markers, and how to make believe. I see Micah saying please and thank you and giving lots of hugs and kisses. I’m reminded everyday that my kids are a blessing to me, and God knows what he is doing. I will make mistakes. I will cry. I will get overwhelmed. But I have a support system to help me- I just have to learn to accept help. I have my God waiting to comfort and strengthen me- I just have to accept it.

“I can do all things through Christ who strengthens me” Phil. 4:13


Posted in Uncategorized

About author

A little bit about me- I am a Mom and a Wife as my full time job. We are a homeschooling family with four kids. I love Jesus, reading, crafting, tea, and nerdy stuff.

Search

Navigation

Categories:

Links:

Archives:

Feeds